Analysis of polynuclear aromatic hydrocarbons by glass capillary gas chromatography using simultaneous flame ionization and electron capture detection

The possibility of simultaneous application of an electron capture (ECD) and a flame ionization detector (FID) connected to a glass capillary column for analyzing polynuclear aromatic hydrocarbons (PNA) has been investigated. The ECD/FID ratio is determined for 46 PNA compounds. The ratios vary from 0.02 to 117 with relative standard deviations better than 20 percent determined from 10 replicate analyses. The results suggest that the method may be used for obtaining additional evidence in identifying PNA in environmental samples. Impurities and transformation products in the standard were identified by computerized glass capillary gas chromatography/mass spectrometry. Quinones and diones are responsible for the high EC-response determined in some trace components in the standard. An application of the method is shown for PNA from particulates in urban atmospheres.     

Reactions of Polycyclic Ketones with Dimethoxycarbene; a Convenient Route for a ‘One‐Pot’ Preparation of Some α‐Hydroxycarboxylic Acid Esters

Polycyclic ‘cage’ ketones, such as pentacyclo[5.4.0.0^2,6.0^3,10.0^5,9]undecan‐8‐one ( 10 ), pentacyclo[5.4.0.0^2,6.0^3,10.0^5,9]undecane‐8,11‐dione ( 11 ), and adamantan‐2‐one ( 16 ) were treated with the nucleophilic dimethoxycarbene (DMC; 1 ), which was generated thermally from 2,5‐dihydro‐2,2‐dimethoxy‐5,5‐dimethyl‐1,3,4‐oxadiazole ( 4a ) in boiling toluene. In this ‘one‐pot’ procedure, the α‐hydroxycarboxylic acid ester 12 or a corresponding derivative 15 or 17 was obtained (Schemes 4–7). Additionally, ‘cage’ thione 21 was treated with DMC under the same conditions yielding dimethoxythiirane 22 (Scheme 8). Subsequent hydrolysis or desulfurization (followed by hydrolysis on silica gel) of 22 gave α‐mercaptocarboxylate 25 and the corresponding desulfurized ester 24 , respectively. In all cases, the addition of DMC occurred stereoselectively, and the addition from the exo‐face is postulated to explain the structures of the isolated products.     

Further Daphniphyllum Alkaloids from the Leaves of Daphniphyllum macropodum Miq.

Five new polycyclic Daphniphyllum alkaloids, macropodumines F ( 1 ) and G ( 2 ), 17‐oxoyuzurimine ( 3 ), and macropodumines H ( 4 ) and I ( 5 ), were isolated from the leaves of D. macropodum Miq ., collected in Sichuan Province, China. The structures and relative configurations of the new compounds – as well as of four known, related alkaloids – were elucidated on the basis of in‐depth spectroscopic and mass‐spectrometric analyses, by chemical derivatization, and by comparison of spectroscopic data with those of known compounds.     

α-Oxohydrazones as imine component in the synthesis of 4-functionalized azetidinones by the Staudinger reaction

1-(Methyl-p-tolyl-amino)-3-phenoxy-2-azetidinones 4-COX and 4-R substituted (COX: X=Me, Et, Ph, NMe₂, NEt₂, OBu^t; R=Me, Et, Ph) were smoothly prepared from the corresponding α-(methyl-p-tolyl)hydrazonylated ketones, amides and esters via [2+2] cycloaddition with phenoxyketene. The reaction was generally high-yielding and diastereoselective, leading to β-lactams with a cis relationship between the PhO and the COX moieties, except for R=Ph, where an opposite stereoselectivity was instead observed. The azetidinones represent interesting intermediates which couple protection at N(1) and functionalization at position 4 of the ring. Deprotection of N(1) can be easily attained by oxidative N-N cleavage with magnesium monoperoxyphthalate.     

Degradation thermique et etude vibrationnelle de MII(NH4)4(P3O9)2x4H2O(M II=Cu2+, Ni2+, Co2+)

We have studied the thermal behaviour under atmospheric pressure of isotypic tetrahydrate cyclotriphosphates M^II(NH₄)₄(P₃O₉)₂x4H₂O (M ^II=Cu, Ni and Co), between 25 and 1400°C, by X-ray diffraction, thermal analyses (TG and DTA) and infrared spectrometry. This study shows that the series of the compounds M^II(NH₄)₄(P₃O₉)₂x4H₂O (M ^II=Cu, Ni and Co) after elimination of water, in two different stages, and ammonia leads, at 400°C to cyclotetraphosphate M₂ ^IIP₄O₁₂ crystallized and to a thermal residue with a formula H₄P₄O₁₂ which undergoes under a thermal degradation by evolving water and pentoxide phosphorus. The kinetic characteristics of the dehydration and elimination of ammonia have been determinated. The vibrational spectra of Cu(NH₄)₄(P₃O₉)₂x4H₂O were examined and interpreted, in the domain of the valency frequencies, on the basis of the crystalline structure of its isotypic compound Co(NH₄)₄(P₃O₉)₂x4H₂O whose cycle has the site symmetry C₁, of our results of the calculation of the IR frequencies and the successive isotopic substitutions of the equivalent atoms (3P, 3Oi and 6Oe belonging to the P₃Oi₃Oe₆ ring) of the P₃O₉ ³⁻ cycle with high symmetry D_3h. This revised version was published online in August 2006 with corrections to the Cover Date.     

Synthesis and Crystal Structure of Bis(tetraethylammonium) Octabromo‐triselenate(II)‐{dibromodiselenate(I)}, [NEt4]2[Se3Br8(Se2Br2)], the Salt of a Mixed‐valence Bromoselenate(II,I) Anion

The brown crystals of [NEt₄]₂[Se₃Br₈(Se₂Br₂)] ( 1 ) were obtained when selenium and bromine reacted in the solution of acetonitrile in the presence of tetraethylammonium bromide. The crystal structure of 1 has been determined by the X‐ray methods and refined to R = 0.0308 for 10433 reflections. The crystals are monoclinic, space group P2₁ with Z = 2 and a = 12.0393(3) Å, b = 11.8746(3) Å, c = 13.1946(3) Å, β = 96.561(1)° (123 K). In the solid state structure the anion of 1 is built up of Se₃Br₈ unit which consists of a triangular arrangement of three planar SeBr₄ units sharing a common edge through two μ₃‐bridging Br atoms, and one Se₂Br₂ molecule which is linked to one of μ₃‐bridging Br atoms. The three Se^II atoms form a triangle which is almost perpendicular to the planes given by three SeBr₄ moieties. The contact between the μ₃Br and the Se^I atom of the Se₂Br₂ molecule is 3.1711(8) Å and can be interpreted as a bond of the donor‐acceptor type with the μ₃Br as donor and the Se₂Br₂ molecule as acceptor. The terminal Se^II‐Br and μ₃Br‐Se^II bond lengths are in the ranges 2.3537(7)–2.4737(7) Å and 2.7628(7)–3.1701(7) Å, respectively. The bond lengths in coordinated Se₂Br₂ molecule are: Se^I‐Se^I = 2.2636(9) Å, Se^I‐Br = 2.3387(11) and 2.3936(8) Å.     

Perchloric Acid–Silica (HClO4⋅SiO2)‐Catalyzed Synthesis of 14‐Alkyl‐ or 14‐Aryl‐14H‐dibenzo[a,j]xanthenes and N‐[(2‐Hydroxynaphthalen‐1‐yl)methyl]amides

The synthesis of 14‐aryl‐ or 14‐alkyl‐14H‐dibenzo[a,j]xanthenes 3 involving the treatment of naphthalen‐2‐ol ( 1 ) with arenecarboxaldehydes or alkanals 2 in the presence of HClO₄?SiO₂ as a heterogeneous catalyst was achieved (Table 1), and this reaction was extended to the preparation of N‐[(2‐hydroxynaphthalen‐1‐yl)methyl]amides 5 by a three‐component reaction with urea ( 4a ) or an amide 4b – d as a third reactant (Table 2).     

Luminescence Properties of Terbium-, Cerium-, or Europium-Doped α-Sialon Materials

New interesting luminescent α-sialon (M_(m/val+)^val+ Si_12-(m+n) Al_(m+n)OnN_(16−n)) (M=Ca, Y) materials doped with Ce, Tb, or Eu have been prepared and their luminescence properties studied. These show that Tb and Ce are in the 3+ and Eu in the 2+ state. Low-energy 4f↔5d transitions are observed as compared to the luminescence of these ions doped in oxidic host-lattices. This is partially explained by the nitrogen-rich coordination of the rare-earth ion and partially by the narrow size of the lattice site. The latter gives rise to a strong crystal-field splitting of the 5d band and a rather large Stokes shift for Ce³⁺ and Eu²⁺ (6500-7500 and 7000-8000 cm⁻¹, respectively). For (Y,Tb)-α-sialon the Tb³⁺ 4f→5d excitation band (∼260 nm) is in the low-energy host-lattice absorption band (?290 nm), giving rise to a strong absorption for 254-nm excitation, but a low quantum efficiency. The latter is due to photoionization processes or selective excitation of Tb³⁺ at the defect-rich surface, resulting in radiationless transitions. Ce- and Eu-doped Ca-α-sialon show bright long-wavelength luminescence (maxima at 515-540 and 560-580 nm for Ce and Eu, respectively) with a high quantum efficiency and high absorption for 365- and 254-nm excitation. The Eu²⁺ emission intensity and absorption increases for increasing m, which is explained by the Eu²⁺ richer α-sialon composition. The position of the Eu^2α emission does not shift with changing composition of the host-lattice (m, n values), indicating that the local coordination of the Eu²⁺ ion is hardly dependent on the matrix composition.     

Qualitative supercritical fluid extraction coupled to capillary gas chromatography

The usefulness and ease of utilizing supercritical fluid extraction (SFE) directly coupled to capillary gas chromatography (GC) as quantitative or qualitative analytical problem-solving tools will be demonstrated. As an alternative to conventional liquid solvent extractions, SFE presents itself as a means to achieve high extraction efficiencies of different compounds in complex solid matrices in very rapid tims frames. Moreover, SFE has an additional advantage of being able to achieve distinct extraction selectivities as a function of the solubilizing power of the supercritical fluid extracting phase. For on-line SFE/GC, the extraction effluent is directly transferred to the analytical chromatograph. On-line SFE/GC involves the decompression of pressurized extraction effluent directly into a heated, unmodified capillary split injection port of the GC. In this respect, SFE introduction into GC can be used as an alternative means of GC injection, comparable to such modes of injection as pyrolysis and thermal desorption. This paper will show applications of SFE/GC where mass spectrometric detection together with flame ionization detection was used for component identification from environmental, tobacco, and petroleum matrices.     

Spectrophotometric Determination of Rhenium(IV) with Thiocyanate,TX-100 and N,N′-Diphenylbenzamidine

A spectrophotometric method to determine rhenium(IV) at trace level is based on the extraction of Re(IV)-SCN^? complex in sulphuric acid media with N,N′-diphenylbenzamidine(DPBA) in presence of a non-ionic surfactant triton X-100 (TX-100) in chloroform. The complex shows maximum absorbance at 435 nm with amolar absorptivity value of 4.24 × 10⁴ L mol^?1 cm^?1 at an acidity range 3.5-6.5 M H₂SO₄. The method followed Beer's Law for the system Re(IV)-SCN^?(TX-100)-DPBA upto 4.0 μg Re(IV) mL^?1. The detection limit of the method is 5 ppb. None of the tested foreign ions, except molybdenum(VI), interfere with the determination of rhenium. The interference due to molybdenum could effectively be removed by prior precipitation with oxine. The effect of various analytical parameters on the extraction of the metal are discussed.